Drift it like it's hot

o man o man!
I can't resist but to say this Miata is my favorite!!
Why? Clean, has the quality, the stance, Daym~ I don't know what else to say.
The car is a 99 10th ann. 6spd with torsen lsd Miata owned by poker!! from the StanceWorks forums.
You don't see a lot of cars with these wheels, especially on a Miata.
It's on 15x8.5 & 15x9.5 +27 all around, WORK Equips in Gold, wrapped on Falken Azenis 205/50/15 and Hankook RS-2 225/50/15.
I guarantee this Miata will be one of your favorites from now on.
Enjoy the pics and start loving Miata's!

Wheels/Suspension
Work Equips (Gold) 15x8.5 & 15x9.5 +27 all around
Falken Azenis 205/50/15 and Hankook RS-2 225/50/15
VMAXX Coilovers
11" Corrodo Rotors

Exterior/Interior
Rollbar (Custom made by Dan Chilton)
Bomex Aero Kit
Chaser Aero Carbon top

Engine
Jackson Header

Rolling shots FTW

It's pretty hard to make those tires fit under the fender and be stance'd at the same time, but roll them and pull!! You can see some great work here.

Check out these awesome drifting shots

Go Go Go!!!

So what's the next upgrade? Bye Bye to 15x10 WORK Equips and say Hello to 15x12 Jlines
-

Wheels in SBC finish + Stance = WIN

From the 215 area, Matt Nugent is driving a black RSX with SBC finished Enkei RPF1's.
I've been doing a lot of coverages on cars with RPF1's, but I just can't resist the sexiness of them, especially the concave ones.
Dam..if they only made ones in 5x100 bolt pattern with concaveness..:(
Anyways! Check out this clean and sexy ride of Matt's.
No extreme mods at all, but it's all about the Stance!!
Basic, Simple, Clean, Quality, ... that's enough.
The awesome photography by Matt makes his car even more sexier.

Wheels/Suspension
Function and Form Coilovers
17x9.5 +18 SBC Rpf-1's with a Federal 215/40/17
SPC rear camber arms

Engine
Injen SRI
Buddyclub Spec III Exhaust

This place is MONEY

Check out more photos by Matt: Flickr

WFC 818 Meet

Yesterday was the first Meet for the WFC people living in the 818 area. The word wasn't spread throughout the forums so not a lot of people showed up. It was great to see three guys that had their cars properly stance'd.

First time testing the 40d and to compare with the xsi that I had before, the image quality of the xsi was a bit better. Maybe it's because I'm getting used to this new machine and because it's classified as a "professional" dslr. Anyways, here are the pics and enjoy!

More pics: Flickr

Hot & Cold S14

One of my favorite cars, the S14.
Slick looking, fast, popular. It has almost every component that attract car lovers.
I've seen numerous S14's on the streets and most of them are amazing.
Today's coverage is for Ho Young Lee's sexy looking S14 on white Enkei RPF1's.
Why Hot & Cold? Hot because it's a S14 and Cold because of the cool looking white rpf1's.
This dude is ballin owning a S13 and S14, one being a daily driven car and the other for drifting.
It's hard to maintain two cars, espeically if one is for drifting, but Lee managed to do amazing work on both cars.
The S14 is not hellaflush, but stance'd to my liking.
Very clean and well managed, i give this car a thumbs up!

Wheels
Enkei RPF1's in Factory Enkei White
F: 17x9+22[with 20mm spacers] in Dunlop Drezza DZ101 225/45/17
R: 17x10+18 in Federal 595SS 245/40/17

Exterior
Version Select V1 Aero Kit
D-Max Roof Spoiler
D-Max Clear Corner lights
D-Max Clear Blinkers
JDM bumper side markers
Supermade Clear Headlight Lens
Mod-Express 6000K HIDS

Interior
NRG V2.5 Quick Release
NRG Short Hub
NRG 350mm Deep dish steering wheel
DC2 Acura GS-R Shift Knob!
Alpine HU and speakers
Drift Knob
Prosports Water Temp Gauge

Engine
Project Silvia Test Pipe
Circuit Sports dual 3" turbo catback exhaust

Suspension
Circuit Sports Front Strut Bar
Stealth Custom Fab Front Power Brace
Stance GR+ Coilovers
Techno Toy Tuning T/C Rods
Techno Toy Tuning Subframe Collars
SPL Outter Tie Rod with angle spacer
Tein Z33 Inner Tie Rod
Z32 Front brake upgrade with Project Mu Street Pads
Circuit Sports Rear Traction Rod
Circuit Sports Rear Rear Upper Control Arm
Circuit Sports Rear Rear Toe Rod
WhiteLine Rear Sway Bar
Kaaz 2 Way LSD with Greddy Diff. back plate
Stance solid diff. bushings
Front OEM 5lug Hubs with Peak Performance 60mm Long Studs
Rear Circuit Sports 5lug Hubs with 60mm Long Studs

The front of Lee's S14 is amazing. I like the aggressive but clean look.

You could see from the side that the car is well stance'd

Here is a shot of Lee's S13 and S14. You could see how the front bumper of the S13 is pretty much f'ed up :D Drifters = Zip Ties!

I love RPF1's!!! WIN!

Photo credits go to PXRacing

Unique touch to a S2K

Leif Bjarne Maeland owns this clean and unique s2k.
I've never seen such a hood design, seriously.
It is wrapped with custom 3M Grandma's wallpaper vinyl.
Sounds and looks unique eh? The car is clean and will look much cleaner, but sometimes, you could be different and props to Leif for doing so.

When I first saw the photos of Leif's s2k, I thought he was on WORK's, but found out they were Gram Lights 57 Optimise, which I never heard of before.
They look sick and amazing!! and because he is "stance'd," it's even better. Leif was telling me that he didn't have a massive list of mods done to his car, but it really doesn't matter as long as you have the wheels and the stance.
Simply Clean + Quality + Stance = WIN!

Wheels/Suspension
Gram Lights 57 Optimise 17x8.5 ET30 215/40 F, 17x9.5 ET38 235/40 R
T1R adjustable suspension
T1R drive shaft spacers
APP brake lines
Carbotech brake pads
Beatrush tower bar

Exterior/Interior
Custom 3M Grandma's wallpaper vinyl
Corbeau Sprint seat with F1Spec low position rails
ARC spark plug cover

Engine
HKS exhaust with testpipe